FORGOT YOUR DETAILS?

The MIL Scale GAP Reticle in the B-10 features full MIL and 1/2 MIL hash marks laid out in a clean display. The full MIL hash marks are numbered every 2 MILs for quick and easy reference. The hash marks represent a total of 9 MILs of adjustment below the horizontal axis, 4 MILs of adjustment above the horizontal axis, and 4 MILs of adjustment to the left and right of the vertical axis

This MIL based reticle uses the proven circle method of quick acquisition, for lower magnifications, as well as a ranging reticle. ½MIL increments make up all four quadrants of the crosshair, a total of 10 MIL’s for the bottom/right/left and the upper with 6 MIL’s. Heavy duplex posts to the outer edge aid in low magnification aiming as well as keeping the weapon level.

This reticle was designed to be a simple MOA reticle that allows for precise hold over shots and ranging. Each hash mark is 2 MOA with numbering every 10 MOA for reference. A total of 40 MOA on the vertical axis below the center, and a total of 30 MOA on each side of center on the horizontal axis.

The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman alike. As part of the B-10 rifle scope, the H425 reticle includes an inverted ‘L’ range finder in the lower left quadrant that is calibrated in Shooter’s Minute of Angle (SMOA) or Inch Per Hundred Yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 MILs of adjustment hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each line set at 1 MIL to compensate for wind, drift, speed of target, etc.

U.S. Optics FDN-10X

$2,374.05

If you’re looking for a scope that is highly effective at both extremes of its magnification range, all while maintaining revered optical clarity, you’ve found it. The FDN 10X 1.8-10X features a 42mm objective, 6061-T6 aluminum 34mm tube, low-profile ER3K elevation knob with a zero stop, ergonomic capped US#1 windage knob, integrated illumination and parallax knob, rapid adjustable 180° magnification throw, and customization options that will undoubtedly meet your needs. Make your next build stand out from the rest with the FDN 10X.

Weight: 27.8 oz
Length: 12.98 in
Tube: 34 mm
Objective Lens Diameter: 42 mm
Ocular Lens Diameter: 37 mm

Recommended Butler Creek Flip-up Covers (NOT INCLUDED)
FDN 10X OBJECTIVE:
MULTIFLEX # 33031
EYEPIECE:
MULTIFLEX 13 & 14 EYE #21314 FITS JUST OVER THE DIOPTER
MULTIFLEX 16, 17 & 18 EYE #21618 FITS PAST THE DIOPTER ONTO EYEPIECE HOUSING

Reviews

There are no reviews yet.

Be the first to review “U.S. Optics FDN-10X”

Your email address will not be published.

TOP